BOSSON 4X4


Tyre deflator
Description :
Features: · Made from 100% brass · Fully adjustable in 3 psi increments · Once you find your desired setting you can lock the deflators where they bleed to the same tire pressure each and every time they are installed. Carefully read entire instructions thoroughly before using this product STEP1:Deflator a spare /extra tire to your preferred deflation pressure. NOTE:When the tire pressure and the deflator setting within &psi, a manual start may be required by fitting the deflator then lifting the center pin to start operation. Step2:With the lock ring and adjusting cap would down,screw your deflator On the valve stem. (Be sure to make sure the threads are clean and in good condotion) STEP3:loosen cap until deflator pops open, then immediately tighten cap to the position where the air stops exhausting . STEP4:Turn lock ring up to adjust cap and tighten. STEP5:Installation is now complete and set to your preferred deflation pressure.
【BACK】
Pervious:Rapid Tyre Deflator Next:NO Product